New release

Don’t sweep a filter.
Sweep between three.

Filter Blender puts three filters on the corners of a triangle: a warm transistor ladder, a screaming 2-pole, a lo-fi CMOS band, or any three of 12 filters inspired by classic circuits, each with its own cutoff, resonance and drive. Drag one dot and your drums, bass, synths or vocals move between them. Or draw the move once and let it loop in time with the song.

$68 + tax if applicable

Free unlimited trial · One-time purchase, free updates · 30-day money-back guarantee · Offline licence

CLAP · VST3 · AU · AAX  |  macOS · Windows · Linux

From the maker of Grit Blender and Vowel Blender, both reviewed by Sound on Sound.

Watch the Filter Blender presentation video

UB DSP featured on

Sound on Sound KVR Audio Audiofanzine Rekkerd Gearspace Audio Plugin Guy Monthly Mixing Bedroom Producers Blog MixbusTv Production Expert

The best filter moment is the one you play.

You know the feeling. The sweep opens, the loop starts to breathe, and you lean in. Filter Blender is built for that moment. Three distinct filters run at once, and one dot moves you between them: the squelch of a diode ladder on the attack, the silk of a state-variable in the tail, and everything in between. You don’t program it. You drag, you listen, you keep what makes you grin. Joy to use, joy to hear.

The Filter Blender triangle: one filter model on each corner, the blend dot between them, the motion transport underneath

Three filters. One dot. Everything in between.

Use one, two or all three. Park the dot on a corner and you have a single filter, any of the twelve, on its own: the other two are not even computed. Slide it along an edge and you blend two. Move inside the triangle and the third joins in, weighted by the distance to each corner.

Each corner keeps its own cutoff, resonance and drive. So moving the dot changes the slope, the resonance and the saturation together. It is three filters playing at once, not a volume crossfade.

Somewhere between the corners is the sound you were looking for. Finding it is the fun part.

  • 12 filter models, each with its own slope, resonance and way of saturating
  • LP, HP, BP, Notch and Bell, depending on the model
  • Three more filters in the chain: comb, phaser and vowel, plus a ring mod
  • A polarity flip per corner: blended, it gives hollow, phasey tones no single filter makes
  • A response curve drawn from the same maths as the audio: what you see is what you hear

From preset to your own move in a minute

1

Load a preset

30 factory presets in eight categories, from Drums & Loops to Self-Oscillation. Each one moves on its own within a few seconds, and each is trimmed to sit close to your dry level.

2

Drag the dot

Toward the corner you like, then turn that corner’s CUTOFF until the track sits where you want it. Hold Shift for fine moves.

3

Let it move

Draw a path on the triangle and the motion recorder loops it in time with the song. Or hand the blend to an LFO, an envelope follower or a drawn MSEG. Your loop stops sitting still and starts to breathe on its own.

Hear the difference

Flip between dry and wet. Then try going back to dry. Best with headphones.

Drums

Bass

Pad

Guitar

Vocals

Self-oscillation

Draw it once. It keeps moving.

Press REC and draw a path on the triangle. The path is re-timed to a constant speed, so how fast you drew does not matter, only where you went. Press PLAY and the blend travels between the three filters on its own, at a free rate or locked to the tempo, forward, backward or ping-pong. The loop stops standing still and starts to travel.

Don’t want to draw? Pick a ready-made shape: a circle, a triangle, or a rosette whose petals land on the corners, for a blend arpeggio. Playback runs inside the audio engine, so it keeps going with the window closed, and a preset saves its path.

The triangle with a Rosette path from the motion recorder: the dot travels it between the three filters, above the record, play and shape controls

Three more filters, in any order.

Around the triangle, the chain holds three filters of another kind: a comb filter, a phaser built from up to 24 allpass stages, and a vowel filter made of four formant band-passes. Plus a ring modulator. The three filters on the triangle always run in parallel, the dot setting how much of each you hear; the chain runs in series, one stage into the next. Drag any stage before or after the triangle.

Ring mod first, and the triangle carves its sidebands into a new instrument. Comb before the filter, and the filter’s motion plays the comb. Phaser before it, and the sweep moves inside the tone rather than sitting on top. Moving an effect is a different sound, not just a different routing.

The FX panel: Comb Delay, Ring Mod, Phaser and Vowel, numbered in chain order

Let your playing move the blend.

Nine modulator types, up to 16 at once, and they can modulate each other: LFO, MSEG, step sequencer, audio-rate oscillator, envelope generator, envelope follower, macro, MIDI and XY pad. Route one to the level of a corner and the dot moves on its own. The blend travels between filters instead of one filter wobbling.

An envelope follower opens the filter wide on a hard note and barely on a soft one. The envelope generator fires on your audio or on MIDI notes, one envelope per hit or per note. Keytrack, velocity, aftertouch and mod wheel are all sources you can route. It feels less like automation and more like an instrument that listens.

An LFO routed to the LEVEL knobs of the three corners: the rings show how far it moves each one

The details that keep it musical

The bass stays put

Turn on LOWS and everything below the split, anywhere from 20 to 500 Hz, skips the filters and the effects. Push the resonance, the ring mod or the comb as hard as you like: the kick and the bass stay as they were. So you can push without fear.

Filters that sing

Eight of the twelve models can self-oscillate: turn DRIVE up, push RESONANCE toward the top, and the cutoff becomes a pitch. On MooLadder, LushJup8, MorphPoleX and WildDiode3 it lands on the note shown under the CUTOFF knob, so you can tune it to the song. The other four sing off that note, so tune those by ear. HUSH makes it go quiet when the music stops. The filter becomes an instrument.

Resonance without the spikes

Right after the filters, a limiter catches what a screaming resonance throws at you. BRK holds the peaks without changing the tone. SFT compresses 3:1 and warms them up. Chase the scream without guarding the fader.

Judge the tone, not the volume

LOUDNESS holds the output close to your input level, so a closing filter does not sound worse just because it is quieter. You hear the character, and you trust your ears. A/B and 29 steps of undo cover the rest.

Stereo your way

L/R filters left and right. M/S filters the centre and lets the sides through, so the reverb and the room stay wide. MONO runs the filters once and halves their CPU.

Clean highs, fixed latency

Bright settings switch the filters to 2x oversampling on their own above 8 kHz, and 2x or 4x are there by hand. The latency stays at 47 samples (about 1 ms at 48 kHz) at every setting, so your DAW never has to recompute its delay compensation.

Twelve circuits, each with its own character

The names are ours, and each one is inspired by a classic circuit. Use the same model on two corners if you like: two ladders at different cutoffs make a great pair.

  • MooLadder

    Warm 4-pole transistor ladder, round and musical resonance. LP · HP · BP

  • Acid303

    Diode ladder, about 18 dB per octave near the cutoff. Squelchy: the corner moves with how hard you play. LP · BP

  • OberSilk

    2-pole state-variable, smooth and clean, with a gentle slope. LP · HP · BP · Notch

  • ScreamKor20

    2-pole filter with diodes inside its resonance loop, and diode grit after it as DRIVE rises. With DRIVE up, it screams at the top of RESONANCE. LP · HP · BP

  • BritesteinP

    2-pole multimode with an edgy resonance and a soft limiter in the loop. Turn up DRIVE and it starts to sing. LP · HP · BP

  • LushJup8

    Creamy 4-pole cascade that keeps its bass as the resonance rises, and rounds a loud peak off. LP · HP · BP

  • CrunchWasp

    Lo-fi CMOS-style filter: it clips hard, with a touch of digital grit on top. LP · HP · BP

  • CoastBand291

    Two band-passes in series, West Coast style. In BP, push RESONANCE and DRIVE and every hit rings on one note. LP · HP · BP

  • WildDiode3

    4-pole diode ladder in the VCS3 style. RESONANCE scoops the bass and lifts a peak on the note, and with DRIVE up it sings on that note, close to a pure sine. LP · HP · BP

  • FunkyFollowIII

    State-variable with its own envelope follower: the cutoff rises with how loud you play, read in decibels, so quiet playing sweeps it too. Play harder, or raise IN or DRIVE, for a wider sweep. LP · HP · BP

  • CryWah

    Swept, vocal band-pass, like a wah pedal. BP

  • MorphPoleX

    Pole-mixing multimode: the most shapes of any model, a deep Notch, and the only Bell. LP · HP · BP · Notch · Bell

How they are built

You don’t need to know any of this to enjoy it. But if you like to know why it sounds the way it does:

Every model is built on a zero-delay-feedback core, which keeps the filters stable and responsive when you sweep or modulate them fast.

Each model has its own saturation, in its own place. The three 4-pole ladders saturate inside their feedback loop when you push them, and their DRIVE also feeds the resonance, so DRIVE changes how the resonance behaves, not only how loud it gets. ScreamKor20 has diodes inside its resonance loop and adds diode grit after the filter as DRIVE rises, CrunchWasp clips hard with a touch of quantisation, and the diode models follow diode curves. Turn a DRIVE knob and a small graph shows the kind of curve that corner uses.

Cutoff, resonance and drive are smoothed sample by sample, so fast automation does not step. The response curve on screen is drawn from the same maths as the audio. And when a corner you can hear sits above 8 kHz, the filters switch to 2x oversampling on their own, with the same latency either way.

In their words.

“I’ve never seen anything like it. […] it does work for me because it’s creative, it sounds good, it gives me unexpected results in seconds.”

“…literally all you need to do is select what you would like to modulate and it does it automatically.”

“Personally, I think it’s a plugin that breaks, in a good way, the assumption that a filter is something you move along a single line.”

See it in action

Folia Soundstudio video on Filter Blender

Folia Soundstudio

The Sound Test Room video on Filter Blender

The Sound Test Room

Oliver Shillito review of Filter Blender

Oliver Shillito

wil maker review of Filter Blender

wil maker

beesic video on Filter Blender, in Japanese

beesic (in Japanese)

Paul Marx (MeinHomestudio) video on Filter Blender, in German

Paul Marx, MeinHomestudio (in German)

Ben, founder of UB DSP

Who makes this.

I’m Ben. Master’s in Signal Processing, Bitwig Certified Trainer, and I make music as unTIL BEN and with Scarset Rebellion. I design every UB DSP plugin: how it sounds and how it feels to use.

Three plugins since February 2026, each one updated since, with dated release notes on the Downloads page. Sound On Sound reviewed Grit Blender and Vowel Blender. When you write to support, I’m the one who answers.

Filter Blender is the third Blender. If you have played Grit Blender or Vowel Blender, you already know how this one works: one dot, and a blend you can hear move.

Joy to use, joy to hear. That is the only brief I give myself.

Hear the music →   Read the manual →

Fair questions, straight answers.

Before you buy

“Three filters at once sounds like a lot. Sometimes I just want one good filter.”

Then use one. Park the dot on a corner and Filter Blender is a single filter, any of the twelve, with its own cutoff, resonance and drive. The other two corners sit at 0 % and are not computed at all, so it costs one filter. Slide along an edge when you want two, and move inside the triangle the day you want all three.

“My DAW and every synth I own already have filters.”

They do, and each one gives you one character at a time. Filter Blender runs three at once, on any audio: a drum loop, a vocal, a bus, a bounced stem. Each corner keeps its own cutoff, resonance and drive, so moving the dot changes the slope, the resonance and the saturation together, and the response curve shows you where you are. Going from a ladder to a diode filter to a state-variable is one drag. If one character is all you need, the filter in your synth is the right tool. If the move between characters is the sound you are after, that is what this plugin is built for.

“I already own a multi-filter plugin.”

Then you know what two or four filters on one sound can do, and that blending them works. Filter Blender is built around a different move: twelve filters inspired by classic circuits, each with its own resonance and its own way of saturating, three at a time, and one dot that weighs them by distance, so the character of the filter changes while you play. Draw that move once on the triangle and it loops in time with the song. Put both on the same loop and listen: the trial has no time limit.

“One developer I’ve never heard of. Will this still work in five years?”

A fair question, and I won’t answer it with a promise. Here is what you can check instead. Grit Blender came out in February 2026, and Vowel Blender in May 2026. Both were reviewed by Sound on Sound. Updates are free for life. Your licence is a file on your computer, checked offline: nothing at UB DSP needs to be online for the plugin to keep working. And when you write to support, I’m the one who answers.

“I own Vowel Blender. Is the Vowel stage the same thing?”

No, and you should know that before you buy. The Vowel stage in Filter Blender is a smaller tool: ten vowels on one MORPH knob, built from four formant band-passes, with SHIFT and Q. It talks, and it sits in the chain before or after the triangle. Vowel Blender is the full plugin: ten vowels on a 2D pad, seven voice models and its own modulation system. If vowels are the point, Vowel Blender is the one to get. If you want a filter that can also say a vowel on the way, this is the one.

The practical side

AU, VST3, CLAP and AAX on macOS (Apple Silicon and Intel, macOS 10.13 or later; versions before macOS 11 are not tested). VST3, CLAP and AAX on Windows. VST3 and CLAP on Linux. There is no standalone app. It runs on mono and stereo tracks, and it has been tested in Ableton Live, Bitwig Studio, Logic Pro, Pro Tools and REAPER. In Logic Pro, look under MIDI-controlled Effects: Filter Blender accepts MIDI for its modulators, so that is where Logic files it. If something does not work in your setup, the 30-day money-back guarantee covers you.

No. The envelope followers and the envelope generator listen to the audio going into the plugin. Put it on a drum loop and the loop plays the filter, no routing needed. There is no external sidechain input: what you hear is what drives it. MIDI is only needed for two things: the MIDI modulator (keytrack, velocity, aftertouch and mod wheel), and the envelope generator in MIDI mode, which gives you one filter envelope per note, legato included. Everything else works without a single note.

Yes. The dot is two parameters, Blend X and Blend Y, and the three LEVEL knobs move it as well, so an automation lane drives it like any knob. Three more ways stack on top of that: the motion recorder, which plays a drawn path inside the audio engine, window open or closed; a modulator routed to Level A, B or C; and the SHIFT, SPREAD and DEPTH macros, which move the corners while the dot travels. The chain order and LINK are saved with presets but are not automatable.

Not per filter: each model has its own slope, 12, 18 or 24 dB per octave. To change the steepness, blend models. A 4-pole ladder, a 2-pole state-variable and a diode ladder at about 18 dB per octave, at the same cutoff, give you three slopes on one frequency, and the dot sets how steep the result is. That is how the Init preset is set up.

It depends on what you switch on. The three filters are the main cost, and a corner at 0 % is not computed at all, so parking the dot on one corner is cheaper than the middle. MONO and M/S run the filters once instead of twice. Leave OS at 1x: the plugin switches the filters to 2x on its own only when a corner you can hear sits above 8 kHz. The effects run at the host’s sample rate, and each effect and each modulator adds a little, so switch off what you do not use.

47 samples at every setting, about 1 ms at 48 kHz, reported to your DAW so it compensates. It does not change when you switch oversampling or load a preset, so your DAW never has to recompute its delay compensation in the middle of a session. The limiter’s look-ahead, off by default, adds about 1.5 ms when you turn it on in the About panel.

30 factory presets in eight categories: Init & Basics, Drums & Loops, Bass, Guitar & Keys, Vocals, Synth & Pads, Sound Design and Self-Oscillation. Every one of them moves on its own within a few seconds of playing, and each is trimmed to land close to your dry level, so you compare tone rather than volume. A preset carries the modulators, the chain order and the motion path. In CLAP hosts with a preset browser (Bitwig Studio, REAPER), the factory presets show up in the host’s own browser with tags. Your own presets live in Filter Blender’s menu as .fbpreset files.

Then the filters are probably working where your sound isn’t. Each preset was tuned on example material, and a cutoff only changes something where your track has energy: a low-pass set above a hi-hat loop leaves it untouched. Turn SHIFT first. It moves all three cutoffs together, up to two octaves either way, until you hear the sound open or close. If LOWS is on and your source is mostly low end, a bass or a kick, lower the split or switch LOWS off, since everything below it skips the filters. If the preset moves with an envelope follower and nothing moves on your track, raise its Sensitivity, which is there for quieter sources. And listen for tone rather than volume: each preset is trimmed to land close to your dry level, on purpose.

You buy once, you get a keyfile, you load it in the plugin. The check happens on your computer, with no activation server and no dongle. Your licence covers up to three computers you personally own and use, and the keyfile stays in your account at ubdsp.com if you need it again. Until you buy, the trial is the full plugin with 2 seconds of silence every 40 seconds, for as long as you like. Updates are free for life. Telemetry is off unless you turn it on.

One payment, no subscription, free updates for life. Every purchase has a 30-day money-back guarantee, no questions asked, and the trial has no time limit, so you can decide on your own tracks before paying. If you already own Grit Blender or Vowel Blender, log in: your owner’s price shows on this page.

Technical details

Plugin formats macOS: AU, VST3, CLAP, AAX · Windows: VST3, CLAP, AAX · Linux: VST3, CLAP
Platforms macOS 10.13 or later (Apple Silicon and Intel; versions before macOS 11 are not tested), Windows 64-bit, Linux 64-bit
Filter models 12, three at a time on the triangle, in parallel. LP, HP, BP, Notch and Bell depending on the model. Each has its own slope (12, 18 or 24 dB per octave). Eight can self-oscillate, with DRIVE up.
Filter design Zero-delay-feedback cores, a saturation of its own per model, per-sample parameter smoothing, half-band oversampling (1x, 2x, 4x)
Per corner Model, type, polarity, CUTOFF (20 Hz to 20 kHz, shown as a note), RESONANCE, DRIVE, LEVEL, stereo width or balance
Macros SHIFT (all cutoffs, ±2 octaves), SPREAD, DEPTH, plus LINK to share one cutoff
Chain Comb filter (Comb Delay), Phaser (2 to 24 allpass stages), Vowel filter (4 formant band-passes), Ring Mod, in series. Any order, before or after the triangle.
Motion recorder Drawn paths or four shapes (Circle, Triangle, Rosette V, Rosette M). Free rate or tempo-synced, regular, dotted or triplet. Forward, reverse, ping-pong.
Modulators 9 types (LFO, MSEG, Step Sequencer, Audio Oscillator, Envelope Generator, Envelope Follower, Macro, MIDI, XY Pad), up to 16 at once, intermodulation
Output stage LOWS crossover (24 dB/oct, 20 to 500 Hz), MIX, LOUDNESS, IN and OUT (±24 dB), limiter (OFF, BRK, SFT), HUSH
Stereo modes L/R, M/S (filters the centre, sides pass through), MONO
Oversampling 1x, 2x, 4x, plus automatic 2x when an audible corner sits above 8 kHz
Latency 47 samples at every setting, reported to the host. About 1.5 ms more with the limiter look-ahead, which is off by default.
Presets 30 factory presets in 8 categories. In CLAP hosts with a preset browser (Bitwig Studio, REAPER), they show up in the host’s browser too.
Window Resizable from 850 × 520 to 1500 × 1200, A/B, 29 steps of undo
Inputs Mono or stereo. No external sidechain: the envelope followers listen to the plugin’s input.
MIDI Notes, velocity, aftertouch (channel pressure, and per-note pressure in CLAP hosts that send it) and mod wheel (CC1). Needed only by the MIDI modulator and the envelope generator in MIDI mode.
Licence Offline keyfile, up to 3 computers you own. Free unlimited trial: fully working, with 2 seconds of silence every 40 seconds.

Play the space between filters.

Load a preset, drag the dot, smile. One-time purchase, free updates for life.

$68

One-time purchase · Free updates · 30-day money-back guarantee

+ tax if applicable

Get Filter Blender for $68.

Try it free

Already running the trial? Load your keyfile and the silences stop. Nothing to reinstall.

Already own Grit Blender or Vowel Blender? Log in and your owner’s price shows here.